Waterproof Your Deck
Water, when combined with UV radiation and changes in weather and temperature, can cause your deck to look dull and weathered by washing away your deck's finish, natural resins, and color. While you can't completely prevent your deck's exposure to the elements, sealing your deck will help sustain its finish, which may save you time and money.
Seal your deck now to keep it looking its best. First, stop by your local True Value hardware store for the tools, products, and expert advice you need to keep your water heater in tip-top shape.
Step 1. Check Your Deck
There are a couple of tests you can perform to see if your deck needs waterproofing. Drop several drops of water onto the deck. If the water beads up, the deck is still protected and doesn't need to be waterproofed now. If a drop soaks into the wood, it means the old finish or waterproofing layer has worn away leaving the wood unprotected. You can also firmly press a piece of tape against the surface to be stained. The presence of old stain or wood fibers on the tape could indicate a potential moisture problem. Remove eroded wood fibers and loose stain by using a wood stripper then sanding and power washing the surface.
If your deck looks faded and gray, it’s time to refinish with some coats of stain. See the project, Stain Your Deck for more tips and information on how to finish your deck. All stains are waterproofing sealants as well, allowing you to stain and seal in one step. If it’s time to refinish your deck, consider using a quality stain, such as Woodsman.
- Before you start staining or sealing, check your local weather report to be sure you'll have at least 48 hours of dry weather.
- All stains protect wood from moisture, but some provide better protection from UV rays. Clear stains only protect wood, while pigmented stains provide a higher degree of UV protection.
Also, check your deck for wood that's worn out, splitting, twisting or rotting. If you see these signs, you will need to do more prep work and refinish the deck, before waterproofing.
Step 2. Prepare the Deck for Waterproofing
Before you start, remove everything from the deck including furniture and potted plants. Loosely cover any delicate or fragile ground plants adjacent to the deck with tarps or drop cloths. Don't use plastic sheeting on shrubs and plants. It can create a deadly "greenhouse effect" and harm your plants. Remove drop cloths from your foliage as soon as your project is complete so they don't suffocate. Sweep off loose debris with a broom and clean between the cracks using a slender stick or tool. Repair damaged boards and hammer in popped-up nails.
Use a garden hose or a pressure washer to spray the surface of the deck, forcing away dirt, dust, oil and grease. This will also help remove the top layer of previous waterproofing. Begin at one end of the deck and continue until you have rinsed the entire surface and removed as much dirt as possible. If you use a pressure washer, keep the pressure set to less than 1,000 pounds per square inch and leave a few feet between the spray nozzle and the deck to avoid damaging the wood. Set it to spray a fan of water so it pushes dirt and debris away faster. Spray between the deck boards to eliminate any remaining debris. Use a pole sander or orbital sander with medium-grit sandpaper to smooth down any splintered areas and to remove remnants of the previous layer of sealant. Starting with as clean a surface as possible will help the new coat of sealant set in and provide a better level of protection.
- When using a pressure washer, wear safety glasses to protect your eyes from splashing water
Cleaning your deck at least once a year helps it last longer and look better while maintaining the integrity of the wood. And when you're planning on sealing or refinishing your deck, you'll have to clean it first. Deck cleaning products are available in a variety of types and strengths. Some offer a special chlorine bleach formula for eliminating mold, mildew and algae. However, chlorine bleach formulas may require more frequent cleanings. Consider using a non-chlorine bleach cleaner instead, such as Woodsman® Premium Wood Cleaner.
- The best outdoor temperature for cleaning and treating your deck is between 50 and 90
Make sure your deck is compatible with the cleaner you choose, especially, if your deck is made of soft wood like redwood or cedar. Check the manufacturer's instructions to see whether you should start with a dry or wet deck. Try to clean on a calm day to keep wind from blowing the cleaning agent around the yard. Use a deck stain applicator to apply the cleaner to the entire deck. While applying, be careful not to allow the cleaner to puddle anywhere on your deck to assure an even appearance.
Scrub tough areas with a stiff brush or a broom. Don't use wire brushes as wire bristles can break off into the wood and cause rust spots. Follow the product's instructions regarding how long to let the cleaner soak into the wood, usually about 10 to 15 minutes. After the cleaner has been allowed to soak, rinse the deck thoroughly with a hose.
- Cleaners contain bleaching agents, so wear protective clothing, safety goggles and rubber gloves.
After cleaning your deck, let it dry for at least 24 hours.
Step 3. Apply Sealant
Apply a thin, even coat of high-quality, mold- and mildew-resistant, waterproof sealant with UV protection, such as Woodsman® Water Repellent or Woodsman® Wood-Toned UV Wood Sealer and Protector, using a stain brush, in the direction of the boards. Don’t forget to cover corners and other difficult areas such as steps, railings, board ends and cracks. Apply two coats if needed.
- Wear protective clothing, safety goggles and rubber gloves when sealing your deck to prevent skin irritation.
- Do not apply sealant in direct sunlight. It will dry too quickly without absorbing into the wood.
Step 4. Finish Up
Stay off the deck while it dries, for at least 48 hours. Allow the sealant to dry completely before replacing any furniture and potted plants. When you're finished, remove your drop cloths, return furniture and other items to your deck, clean your tools and enjoy.
That's it! Your deck is sealed, waterproofed and ready for the winter weather ahead. For the rest of your projects, always go to your local True Value hardware store for the tools, products and expert advice you need to start right.
For more project ideas, visit the Project Library >